Head Up Display (If Equipped)

The HUD  receives a permanent startup battery power supply through the PJB. The HS CAN  comfort systems bus connection allows the HUD  to communicate with other modules such as the IPC  . The IPC  virtual display is also connected to the HUD  through APIX2.

The HUD  is controlled from the IPC  message center.

When selected, the menu offers the following options:

• Selecting the vertical position of the display on the windshield (a temporary border is shown in the HUD  image when adjusting the position).
• HUD  brightness setting, with rain/light sensor input. The rain/light sensor is not linked to the interior illumination dimmer.
• Selecting which information is displayed on the HUD  .

The HUD  showroom mode is controlled from the IPC  service menu and displays example images on the windshield when the vehicle is stationary.

Prior to selecting the HUD  windshield position the user should select their desired seating position. The steering wheel controls are used to set the horizontal position of the windshield display. When set, the information can be saved in the seat memory control system, storing the selected preferences.

For additional information, Refer to: INFORMATION AND MESSAGE CENTER .

For additional information, Refer to: EXTERIOR LIGHTING .

For additional information, Refer to: SEATS .