Fuel Tank Filler Pipe - INGENIUM I4 2.0L Petrol - PHEV (G2173215): Installation

WARNING: This page is about a different variant/trim than selected.

- Install the fuel filler neck.
- Secure the fuel filler neck hose clamp.
- Install the 2 fuel tank filler pipe retaining nuts and the retaining bolt.
  Torque : 10Nm
Install the fuel filler pipe.
Install the rear right fender splash shield.
Refer to: REAR WHEEL ARCH LINER .
Install the rear right wheel and tire assembly.
Refer to: WHEEL AND TIRE .
Connect the startup battery ground cable.
Refer to: SPECIFICATIONS .
Pressurize the fuel system.
Refer to: FUEL SYSTEM PRESSURE RELEASE .
Refill the fuel system.
Bleed the low pressure fuel system.
Refer to: LOW-PRESSURE FUEL SYSTEM BLEEDING .