Oil Pump Chain - INGENIUM I4 2.0L Petrol - PHEV (G2204084): Installation

WARNING: This page is about a different variant/trim than selected.

CAUTION: Make sure a new oil pump sprocket bolt is installed.
- Install the oil pump chain and the gear assembly.
- Make sure that the oil pump sprocket is aligned with the oil pump shaft correctly.
- Using the special tool to hold the oil pump sprocket, install and tighten the bolt.
  Special Tool(s): 205-053
  
  Renew Part: Oil pump gear bolt Quantity: 1 .
  
  Torque
  
  Stage 1: 60Nm
  
  Stage 2: 90°
Install the oil pan.
Refer to: OIL PAN - INGENIUM I4 2.0L PETROL .
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Power Up the High Voltage (HV) system. Only technicians qualified to EVAP level are allowed to perform this procedure. It is mandated that all technicians involved with the steps in this procedure have read and understood the Electric Vehicle Safety Rules.

Refer to: HYBRID ELECTRIC VEHICLE POWER DOWN/UP .