Crankshaft Front Seal - INGENIUM I4 2.0L Petrol - PHEV (G2173075): Installation

WARNING: This page is about a different variant/trim than selected.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Using the special tool install the seal.
  Special Tool(s): JLR-303-1628
- Torque : 26Nm
Install the crankshaft pulley.
Refer to: CRANKSHAFT PULLEY - INGENIUM I4 2.0L PETROL - PHEV .
Connect the startup battery ground cable.
Refer to: SPECIFICATIONS .