Crankshaft Front Seal - INGENIUM I4 2.0L Petrol (G2173060): Installation

WARNING: This page is about a different variant/trim than selected.

CAUTION: Take extra care not to damage the seal.

Using a suitable tool, install the front crankshaft oil seal.

Special Tool(s): JLR-303-1628

Torque : 26Nm
Install the crankshaft damper.
Refer to: CRANKSHAFT PULLEY - INGENIUM I4 2.0L PETROL .
Connect the startup battery ground cable.
Refer to: SPECIFICATIONS .