LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Supercharger Cooling - INGENIUM I6 3.0L Petrol -- Range Rover/L405 >> Supercharger Cooling - INGENIUM I6 3.0L Petrol (G2348512) >> Removal And Installation >> Coolant Pump (G2348747) >> Installation

Coolant Pump (G2348747): Installation

    • Install the auxiliary coolant pump.
    • Fully close the clip.
    • Install the 2 coolant hoses to the auxiliary coolant pump.
    • Connect the electrical connector.
  2. Fill the coolant system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .

scientia non olet · About LEMON Manuals