Oil Supply Pipe (G2327535): Installation

- Install 2 new sealing washers.
  Renew Part : Oil supply pipe sealing washers Quantity : 2 .
- Install a new bolt.
  Renew Part : Turbocharger oil supply pipe banjo bolt Quantity : 1 .
- Install the oil supply pipe.
- Tighten the bolt.
  Torque : 18Nm
- Install 2 new sealing washers.
  Renew Part : Oil supply pipe sealing washers Quantity : 2 .
- Install a new bolt.
  Renew Part : Turbocharger oil supply pipe banjo bolt Quantity : 1 .
- Tighten the bolt.
  Torque : 18Nm
Install the charge air cooler inlet pipe.
Refer to: CHARGE AIR COOLER INLET PIPE (G2397641) .
Connect the startup battery ground cable.
Refer to: SPECIFICATIONS (414-00 Battery and Charging System - General Information, Specifications).