Rear Brake Hose (G2416912): Installation

CAUTION: Make sure that the brake hose is not twisted and is correctly located.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Install the brake hose.
  Renew Part: Brake hose Quantity: 1.
- Install and tighten the bolts.
  Torque
  
  M6 bolt: 10Nm
  
  Banjo bolt: 32Nm
- Connect the brake pipe union.
  Torque : 15Nm
- Install the M8 bolt.
  Torque : 24Nm
Bleed the brake system.
Refer to: BRAKE SYSTEM BLEEDING FIXED CALIPER - VEHICLES WITH: NON-ELECTRIC VEHICLES .

Refer to: BRAKE SYSTEM BLEEDING FLOATING CALIPER - VEHICLES WITH: NON-ELECTRIC VEHICLES .

Refer to: MANUAL BRAKE SYSTEM BLEED - VEHICLES WITH: PHEV .
Install the wheel and tire.
Refer to: WHEEL AND TIRE .