Brake Pedal And Bracket (G1509082): Installation
- CAUTION: Make sure that new nuts are installed.
Renew Part: Brake pedal mounting nut(s) Quantity: 4.
Torque : 25Nm
-
CAUTION:
- The brake pedal MUST NOT be depressed during this operation. Failure to follow this instruction will result in damage to the stoplamp switch.
- Make sure that excessive force is not used when installing the stoplamp switch. Failure to follow this instruction may result in damage to the stoplamp switch.
-
CAUTION:
- Make sure that the area around the component is clean and free of foreign material.
- Install a new shim.