Brake Master Cylinder - INGENIUM I4 2.0L Petrol/INGENIUM I6 3.0L Diesel/INGENIUM I6 3.0L Petrol/TDV6 3.0L Diesel/TDV8 4.4L Diesel/V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol, LHD AWD (G2416913): Removal

NOTE: Removal steps in this procedure may contain installation details.

Refer to: BRAKE FLUID RESERVOIR - INGENIUM I4 2.0L PETROL/INGENIUM I6 3.0L DIESEL/INGENIUM I6 3.0L PETROL/TDV6 3.0L DIESEL/TDV8 4.4L DIESEL/V6 S/C 3.0L PETROL/V8 S/C 5.0L PETROL .
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Torque : 16Nm
CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE:
- Discard the retaining nuts.
- Remove and discard the O-ring seal.
- Take extra care not to damage the component.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Renew Part: Brake master cylinder nut(s) Quantity: 2.

Renew Part: Brake master cylinder seal(s) Quantity: 1.

Torque : 23Nm