Brake Master Cylinder - INGENIUM I4 2.0L Petrol - PHEV (G2416917): Installation
- NOTE:
- Install a new O-ring seal.
- Install new master cylinder bolts.
Install the brake master cylinder and tighten the 2 retaining bolts to the correct torque.
Renew Part: Brake master cylinder nuts and seal kit Quantity: 1.
Torque : 23Nm
- Connect the 2 brake line unions and tighten to the correct torque.
Torque : 16Nm
- Install the brake fluid reservoir.
Refer to: BRAKE FLUID RESERVOIR - INGENIUM I4 2.0L PETROL - PHEV .
- Bleed the brake system.
Refer to: BRAKE SYSTEM BLEED WITH DIAGNOSTIC EQUIPMENT - VEHICLES WITH: PHEV .