LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Range Rover Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- Range Rover/L405 >> Hydraulic Brake Actuation (G1976382) >> Removal And Installation >> Brake Fluid Reservoir - INGENIUM I4 2.0L Petrol/INGENIUM I6 3.0L Diesel/INGENIUM I6 3.0L Petrol/TDV6 3.0L Diesel/TDV8 4.4L Diesel/V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol (G2416907) >> Removal

Brake Fluid Reservoir - INGENIUM I4 2.0L Petrol/INGENIUM I6 3.0L Diesel/INGENIUM I6 3.0L Petrol/TDV6 3.0L Diesel/TDV8 4.4L Diesel/V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol (G2416907): Removal

CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • LHD illustration shown, RHD is similar.
  • Some components shown removed for clarity.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. G11693696Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  2. G11693697Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  3. Using a suitable suction device drain the brake fluid reservoir.
  4. CAUTION: Be prepared to collect escaping fluids.
    G11693875Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
  5. CAUTION: Discard the seals.
    G11674916Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC