Brake Fluid Reservoir - INGENIUM I4 2.0L Petrol - PHEV (G2416916): Installation

NOTE: Install new seals.

Install the brake fluid reservoir.

Renew Part: Brake master cylinder seal(s) Quantity: 1.
Install the brake fluid reservoir retaining bolt.
Torque : 5Nm
- Connect the Anti-lock Brake System (ABS) supply pipe.
- Connect the brake fluid reservoir electrical connector.
Bleed the brake system.
Refer to: BRAKE SYSTEM BLEED WITH DIAGNOSTIC EQUIPMENT - VEHICLES WITH: PHEV .
Install the plenum chamber finisher.