Instrument Cluster (G1577065): Installation
-
NOTE: Install the trim retaining clips in the moulding prior to installing the components.NOTE: If a new component is installed.
- To install, reverse the removal procedure.
-
CAUTION: Only applicable vehicles with software numbers K8D2-14C104-AC or L8B2-14C104-AC as detailed in removal step 1.NOTE:
- Only complete this step if a new instrument cluster is to be installed.
- This step is only applicable to 19MY onward vehicles.
- Non-NAS Markets only.
- SRO must be claimed separately.
Install a new RFA .
Refer to: KEYLESS VEHICLE MODULE .
- Using the diagnostic tool, configure the instrument cluster.
General Equipment: Land Rover diagnostic equipment