Coolant Pump (G1947915): Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Removal steps in this procedure may contain installation details.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Some components shown removed for clarity.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .
Torque : 7 Nm
Torque : 7 Nm
-
CAUTION: Be prepared to collect escaping coolant.NOTE: Do not disassemble further if the component is removed for access only.