Charge Air Radiator Coolant Pump (G2202332): Installation

- Install the charge air radiator coolant pump.
- Install and tighten the bolt.
  Torque : 7 Nm
- Install the coolant hose.
- Install the hose clamp.
- Connect the electrical connector.
- Install the coolant hose.
- Install the hose clamp.
- Install the 2 clips.
- Install the inner wheel arch liner molding.
- Install the 3 clips.
Install the front left wheel.
Refer to: WHEEL AND TIRE .
Fill the engine coolant system.
Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .
Connect the startup battery ground cable.
Refer to: SPECIFICATIONS .