LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Discovery S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM I4 2.0L Petrol -- Discovery/L462 >> Engine Cooling - INGENIUM I4 2.0L Petrol (G2006213) >> Removal And Installation >> Block Heater (G2201218) >> Installation

Block Heater (G2201218): Installation

  1. Install the block heater.

    Torque  : 55 Nm 

  2. Connect the electrical connector.
  3. Install the thermostat housing.

    Refer to: THERMOSTAT HOUSING .

  4. Connect the startup battery ground cable.

    Refer to: SPECIFICATIONS .

  5. Fill the engine coolant system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .

scientia non olet · About LEMON Manuals