Brake Vacuum Pump - INGENIUM I4 2.0L Petrol (G2148709): Installation

NOTE: Only carry out this step if previously removed.
- Install the oil pickup pipe.
- Install and tighten the 2 bolts.
  Torque : 12 Nm
- Install the oil pump assembly.
- Install and tighten the 5 bolts.
  Torque : 25 Nm
Install the wiring harness.
Connect the electrical connector.
Install the oil pump chain.
Refer to the appropriate service information
Connect the startup battery ground cable.
Refer to: BATTERY, MOUNTING AND CABLES .