Cooling Fan (G1983757): Removal
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Remove the air cleaner outlet pipe T-connector
Refer to: AIR CLEANER OUTLET PIPE T-CONNECTOR .
Remove the front finisher panel.
Release the coolant hose.
Disconnect the cooling fan electrical connector.
Remove the cooling fan cover.
Remove the cooling fan cover bracket.
Release the cooling fan wiring harness
-
NOTE: Always protect the cooling pack elements to prevent accidental damage.
Using the special tools loosen the cooling fan retaining nut.
Special Tool(s): 303-1142 , 303-1143
Remove the cooling fan.