Instrument Cluster Warning Indicators
| ITEM | DESCRIPTION |
|---|---|
| 1 | Electric Park Brake warning indicator - Rest of World (ROW) |
| 2 | Electric Park Brake warning indicator - North American Specification (NAS) |
| 3 | Brake warning indicator - NAS |
| 4 | Brake warning indicator - ROW |
The Anti-lock Brake System (ABS) control module requests the display of the warning indicators and messages in the Instrument Cluster (IC) using High Speed (HS) Controller Area Network (CAN) chassis bus signals.
When the Electric Park Brake (EPB) is applied in the static mode, the red EPB warning indicator is permanently illuminated in power mode 6 and for 30 seconds when changed to power mode 0 or 4. If a fault is detected and the EPB is unable to apply the full clamp load, the red EPB warning indicator flashes. If any other EPB fault is detected, the amber brake warning indicator is illuminated. All fault indications are accompanied by a warning chime.
A message will also be displayed in the information and message center of the IC. For additional information, Refer to: INSTRUMENT CLUSTER