Brake Vacuum Pump - V6 S/C 3.0L Petrol (G1509089): Removal
CAUTION:
Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE:
- Removal steps in this procedure may contain installation details.
- Some variation in the illustrations may occur, but the essential information is always correct.
- Some components shown removed for clarity.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: ENGINE OIL VACUUM DRAINING AND FILLING
- NOTE: Remove and discard the O-ring seal.
Renew Part: Brake vacuum pump O-ring seal Quantity: 1 .
Torque : 12 Nm