Brake Vacuum Pump - TDV6 3.0L Diesel (G1605339): Installation

NOTE:
- Install a new gasket.
- Apply silicone gasket sealant or equivalent meeting Land Rover specification.
- The application of sealant must be 10 mm square in two places. Install the brake vacuum pump immediately after applying the sealant.
- The brake vacuum pump should be fitted directly to the engine without smearing the sealant.
- Make sure that the drive coupling is aligned with camshaft coupling.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

To install, reverse the removal procedure.

Renew Part: Brake vacuum pump seal Quantity: 1 .