Pinpoint Test D: HUD Navigation Display Checks

D1: CHECK IF AN APPROPRIATE NAVIGATION SYSTEM IS INSTALLED TO THE VEHICLE
1. Confirm if the vehicle is installed with a Jaguar Land Rover approved navigation system
  Is the vehicle installed with a Jaguar Land Rover approved navigation system?
  
  Yes: GO to D2.
  
  No: HUD navigation display will not operate
D2: CHECK THE CAR CONFIGURATION FILE SETTINGS
1. Using the Jaguar Land Rover approved diagnostic equipment, check the CCF parameters
  Is the ruleset of CCF parameter 127 set to "installed"?
  
  Yes: GO to D3.
  
  No: Set the ruleset of CCF parameter 127 to "installed". Then, GO to D3.
D3: CHECK THE HUD MENU (VIA THE INSTRUMENT CLUSTER) FOR HUD NAV DISPLAY OPTIONS
1. Check the options available in the HUD option menu displayed through the instrument panel cluster
  Is the HUD Navigation Display option available from the HUD option menu displayed through the instrument panel cluster?
  
  Yes: GO to D5.
  
  No: GO to D4.
D4: HUD NAVIGATION DISPLAY OPTION IS NOT AVAILABLE FROM THE HUD OPTION MENU
1. Using the Jaguar Land Rover approved diagnostic equipment, CCF parameters
  Is the ruleset of CCF parameter 516 set to "installed"?
  
  Yes: Check the instrument panel cluster for related DTC s and refer to instrument panel cluster diagnostic processes
  
  No: Check regional availability of HUD Navigation Display. If available, the correct CCF settings are required to enable the display. Check CCF settings are correct and amend as required
D5: ENABLE THE HUD NAVIGATION DISPLAY OPTION FROM THE HUD OPTIONS MENU
1. Enable the HUD Navigation Display option from the HUD options menu through the instrument panel cluster
  Is the HUD Navigation Display option enabled in the HUD option menu displayed through the instrument panel cluster?
  
  Yes: GO to D6.
  
  No: Switch on the HUD Navigation Display option from the HUD options menu through the instrument panel cluster. Then, GO to D6.
D6: CHECK FOR NAVIGATION DISPLAY ON THE INSTRUMENT CLUSTER AND HUD DISPLAY
1. Check for navigation information displayed on the instrument panel cluster
  Is navigation information now displayed on the instrument panel cluster?
  
  Yes: If the HUD navigation display is now also operational, no further action is required. If the HUD navigation display is still unavailable, check the connection and integrity of the AIPX2 circuits to the rear of the cluster and the HUD control module GO to D7.
  
  No: Check the instrument panel cluster for related DTC s and refer to navigation system diagnostic processes

D7: APIX2 WIRING HARNESS CHECKS

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Check the connection and integrity of the APIX2 circuits to the rear of the instrument panel cluster. The connector(s) may be disconnected and still wrapped in protective tape. Remove the tape and reconnect as required

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Check the connection and integrity of the APIX2 circuits to the HUD control module. The connector(s) may be disconnected and still wrapped in protective tape. Remove the tape and reconnect as required
Are all APIX2 cables connected securely to the rear of the cluster and the HUD control module?

Yes: GO to PINPOINT TEST C .

No: Reconnect the APIX2 cables as required. Recheck the HUD navigation display. If the HUD navigation display is now operational, no further action is required. If the HUD navigation display is still unavailable GO to PINPOINT TEST C .