Message Center - Virtual Display

The standard position for the message center in the Instrument Cluster (IC) virtual display is located in the center of the display.

The messages are displayed in priority order (if more than 1 message is present) for approximately 4 seconds as the event occurs. The messages can be cleared after 4 seconds by pressing the 'OK' switch on the steering wheel switchpack. The driver can view current system status messages in the message center. In Power Mode 6 or above the warning messages can be displayed using the 'Show Warnings' selection of the 'Vehicle Information' in the main menu. The menu is not available while warnings are displayed, the warnings must be cleared before the main menu can be accessed.

The message may be accompanied by an icon.

For additional information, Refer to: INSTRUMENT CLUSTER

The messages are displayed in a language applicable to the vehicle market and can be changed using the 'Language' selection of the 'Display' in the main menu.