Lower GLOVEBOX (G1976376): Removal
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the upper glovebox.
Refer to: UPPER GLOVEBOX .
-
CAUTION:
- Make sure the wiring harness and electrical connectors are not damaged during this operation.
- Do not use tools during this operation, removal of the component(s) must be carried out by hand.
- Remove the trim panel.
- Release the instrument panel lower section.
- Remove the screws.
Torque : 9 Nm
- Disconnect the electrical connector from the lower glove box lamp.
- Remove the screws.
Torque : 9 Nm
- Remove the screws.
- Remove the screws.
Torque : 9 Nm
- Remove the screws.