Oil Pan
| ITEM | DESCRIPTION |
|---|---|
| 1 | Oil pan |
| 2 | Oil level gauge |
| 3 | Oil level gauge tube |
| 4 | Sealing washer |
| 5 | Oil pan drain plug |
| 6 | Bolt - Oil pan (quantity 20) |
The oil pan is cast from aluminum alloy using a HP die cast process and is located on the underside of the cylinder block. The oil pan is sealed to the cylinder block with RTV sealant. The oil pan is secured with 14 bolts and 2 shoulder bolts that locate the oil pan to the cylinder block. The oil pan contains the windage tray and the oil level gauge tube. The oil is drained by removal of the oil pan drain plug and washer, located on the side of the oil pan. Use new oil pan drain plug and washer after they are removed.