DTC U2012-64: Car Configuration Parameter(s) - Signal plausibility failure: Action
- Prioritized Checks to Perform
- Using the Jaguar Land Rover approved diagnostic equipment, run application - Service/Select CCF/Copy from AS BUILT. Run application - ECU Diagnostics/Powertrain Control Module (PCM)/Clear Diagnostic Trouble Code(s). Retest
- Refer to the electrical circuit diagrams and check the FlexRay bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Replace the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the body control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC index