DTC U0402-02: Invalid Data Received From TCM - General signal failure: Action
- Prioritized Checks to Perform
- Refer to the electrical circuit diagrams and check the transmission control module power and ground circuits for open circuit, high resistance. Repair the wiring harness as necessary
- Refer to the electrical circuit diagrams and check the transmission control switch power and ground circuits for open circuit, high resistance. Repair the wiring harness as necessary
- Refer to the electrical circuit diagrams and check the high speed CAN bus (powertrain) circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the wiring harness as necessary
- Refer to the electrical circuit diagrams and check the FlexRay bus circuit for short circuit to ground, short circuit to power, open circuit, high resistance. Replace the wiring harness as necessary
- Using the Jaguar Land Rover approved diagnostic equipment, check the transmission control module for related Diagnostic Trouble Code(s) and refer to the relevant DTC index
- Using the Jaguar Land Rover approved diagnostic equipment, check the transmission control switch for related Diagnostic Trouble Code(s) and refer to the relevant DTC index