LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Defender 90 S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV -- Defender/L663 >> Engine Cooling - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2344342) >> Removal And Installation >> Radiator (G2422714) >> Installation

Radiator (G2422714): Installation

    • Install the radiator.
    • Install and tighten the 2 screws.

      Torque  : 4.5 Nm 

  2. Install the cooling module.

    Refer to: COOLING MODULE - [+] NON-ELECTRIC VEHICLES 

  3. Recharge the Air Conditioning (A/C) system.

    Refer to: AIR CONDITIONING SYSTEM RECOVERY, EVACUATION AND CHARGING

  4. Fill the engine cooling system with the correct amount of coolant fluid.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING 

  5. Connect the startup battery ground cable.

    Refer to: 12V SYSTEM DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals