LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2021 >> Defender 90 S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV -- Defender/L663 >> Engine Cooling - INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Petrol - PHEV (G2344342) >> Removal And Installation >> Engine Coolant Degas Separator (G2046485) >> Removal

Engine Coolant Degas Separator (G2046485): Removal

WARNING: Be prepared to collect escaping coolant
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: JACKING AND LIFTING

  2. Partially drain the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING 

  3. G12005812Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Release the 3 upper coolant hoses.

  4. G12005813Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Release the 2 lower coolant hoses.

  5. G12005814Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove the coolant degas separator.