Auxiliary Radiator
NOTE:
Left side installation is shown, right side installation is similar.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Radiator support bracket |
| 2 | Rear air duct |
| 3 | Hose connection - Engine coolant inlet |
| 4 | Isolator |
| 5 | Hose connection - Engine coolant outlet |
| 6 | Front air duct |
The auxiliary radiators are located on each side of the cooling pack, behind the outer air intakes in the front bumper. The auxiliary radiators are installed in air ducts attached to the front bumper armature and the front end carrier. The lower end tank of each auxiliary radiator is located in the air ducts by a spigot equipped with an isolator bush. The upper end tank of each auxiliary radiator is held in a support bracket in the air duct.
The right auxiliary radiator is connected in parallel with the radiator to increase the engine cooling capacity.
The left auxiliary radiator is connected in series with the charge air radiator to increase the charge air cooling capacity.