Transfer Case Detent Pin - INGENIUM I6 3.0L Diesel (G3333408): Removal

NOTE:

This procedure contains some variation in the illustration depending on the vehicle specification, but essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING
CAUTION: Be prepared to collect a very small amount of escaping fluids.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Remove and discard the transfer case detent pin.
Using a suitable lint free cloth, remove any debris from the threads in the transfer case housing.