Standalone Applications (Ecu Set-Up Applications)

The following procedures may be accessed and run individually by the service technician and should be used to facilitate replacement of the transfer case, transfer case components or transfer case oil changes:

• Driveline Functional Test
• Disconnect Functionality
• All Wheel Drive (AWD) Lock Functionality
• Clutch Torque Functionality
• Record Data
• Car Configuration File (CCF) Check
• Vehicle Identification Number (VIN) Learn
• ODST
• Software Download
• Healthcheck
• ECU Stress Test
• Venting Routine
• Oil Fill
• Drain Oil
• TCCM  + BLDC Motor Pump Replacement
• Solenoid Valve/Seals/Flanges Replacement
• Harness Replacement
• FADM  /DDCM  /FDU Replacement
• T-Case Replacement
• EOL Characterization Routine