Selector Shaft Seal (G2391374): Removal

CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.

NOTE:

This procedure contains illustrations showing certain components removed to provide extra clarity.
This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING
Remove the front driveshaft.
Refer to: FRONT DRIVESHAFT
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Remove the nut(S).
- Remove the Emergency Park Release (EPR) lever.
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Use the special tools to remove the seal.
  Special Tool(s): 307-509-1 , 307-509-2
- Discard the seal.