Output Shaft Seal - INGENIUM I4 2.0L Diesel/INGENIUM I4 2.0L Petrol/INGENIUM I6 3.0L Diesel/INGENIUM I6 3.0L Petrol/V8 S/C 5.0L Petrol (G2414215): Installation
-
CAUTION:
- Oil seals must be installed dry.
- Make sure that the mating faces are clean and free of foreign material.
Use the special tools to install a new seal.
Special Tool(s): 307-520 , JLR-307-520-01
- Install the transfer case.
Refer to: TRANSFER CASE
- Check the transmission fluid level.
Refer to: TRANSMISSION FLUID LEVEL CHECK