Oil Pump Drive Chain - INGENIUM I4 2.0L Petrol - PHEV (G2748117): Installation

CAUTION: Make sure that the oil pump drive sprocket is aligned with the oil pump shaft correctly.
- Install the oil pump drive chain and sprocket.
- Use the special tool to hold the oil pump drive sprocket.
  Special Tool(s): 205-053
- Install and tighten the new bolt.
  Renew Part: Oil pump gear bolt Quantity: 1 .
  
  Torque
  
  Stage 1: 60 Nm
  
  Stage 2: 90°
Install the oil pan.
Refer to: OIL PAN - INGENIUM I4 2.0L PETROL - PHEV
Connect the 12 V system.
Refer to: 12V SYSTEM DISCONNECT AND CONNECT