Crankshaft Front Seal - INGENIUM I4 2.0L Petrol (G2344449): Installation

CAUTION:
- Make sure that the area around the component is clean and free of foreign material.
- Take extra care not to damage the seal.
Use the special tool to install a new crankshaft front seal.

Special Tool(s): JLR-303-1628

Torque : 30 Nm
Install the crankshaft pulley.
Refer to: CRANKSHAFT PULLEY - INGENIUM I4 2.0L PETROL
Connect the startup battery ground cable.
Refer to: SPECIFICATIONS