Camshafts - Engine Set (G2344453): Removal

NOTE:

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
This procedure contains illustrations showing certain components removed to provide extra clarity.

Raise and support the vehicle on a suitable 2 post lift.
Refer to: JACKING AND LIFTING
Disconnect the startup battery ground cable.
Refer to: 12V SYSTEM DISCONNECT AND CONNECT
Remove the camshaft carrier.
Refer to: CAMSHAFT CARRIER
CAUTION: Note the installed position of the component(s) prior to removal.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Loosen the bolts 1 turn at a time in the illustrated sequence.
- Remove the 5 camshaft bearing caps.
- Remove the intake camshaft.
CAUTION: Note the installed position of the component(s) prior to removal.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
- Loosen the bolts 1 turn at a time in the illustrated sequence.
- Remove the 5 camshaft bearing caps.
- Remove the exhaust camshaft.