Front Stabilizer Bar - Vehicles Without: Dynamic Response (G2327437): Installation

- Reposition the stabilizer bar.
- Install and tighten the 4 stabilizer bar bolts.
  Torque
  
  Stage 1: 30 Nm
  
  Stage 2: 84 Nm
  
  Stage 3: 120 Nm
NOTE: Repeat this step for the other side.
- Connect the front upper control arm.
- Install and tighten the upper control arm new nut and bolt.
  Renew Part: Front suspension upper arm ball joint to wheel knuckle nut(s) Quantity: 2 .
  
  Renew Part: Front suspension upper arm ball joint to wheel knuckle bolt(s) Quantity: 2 .
  
  Torque : 60 Nm
NOTE: Repeat this step for the other side.
- Install the stabilizer bar links.
- Install and tighten the 2 new stabilizer bar link nuts.
  Renew Part: Stabilizer bar link lower nut Quantity: 2 .
  
  Torque : 185 Nm
- Connect the front brake hose bracket to wheel knuckle.
- Install and tighten the 2 bolts.
  Torque : 10 Nm
Install the air suspension spring.
Refer to: SHOCK ABSORBER AND SPRING ASSEMBLY
Install both front fender splash shields.
Refer to: FENDER SPLASH SHIELD