Control Diagram
A = Hardwired: AM = High Speed (HS) Controller Area Network (CAN) chassis systems bus: AX = Flexray.
| Item | Description |
|---|---|
| 1 | Chassis Control Module (CHCM) |
| 2 | Powertrain Control Module (PCM) |
| 3 | Restraints Control Module (RCM) |
| 4 | Terrain Response (TR) switchpack |
| 5 | Body Control Module/Gateway Module (BCM/GWM) assembly |
| 6 | Anti-lock Brake System (ABS) control module |
| 7 | Instrument Cluster (IC) |
| 8 | Suspension air supply unit |
| 9 | Front air suspension valve block |
| 10 | Rear air suspension valve block |
| 11 | Ground |
| 12 | Power supply |
| 13 | Air suspension switchpack - luggage compartment |
| 14 | Rear right height sensor |
| 15 | Front right height sensor |
| 16 | Rear left height sensor |
| 17 | Front left height sensor |
| 18 | Pressure sensor - rear air reservoir valve block |
| 19 | Temperature sensor - suspension air supply unit |