Follow Mode Off

WARNING: This page is about a different variant/trim than selected.

The driver may select 'Follow Mode Off' if:

The driver wants to reach a desired speed without reacting to vehicles ahead.
If blockage is detected which inhibits normal operation.

When 'Follow Mode Off' is selected the Adaptive Speed Control Module (ASCM) will maintain the desired speed but will not react to vehicles ahead.

Follow mode can be disabled by pressing and holding the gap decrease switch on the right steering wheel switchpack. Press the switch until the 'Follow Mode Off' message is displayed. The 'Follow Mode Off" warning indicator is displayed in the message center.

NOTE: Follow mode on is the default setting for adaptive speed control. Follow mode off is automatically canceled if adaptive speed control is not used for a prolonged period of time. Follow mode off is also automatically canceled if the ignition is switched OFF.

To switch follow mode back on, briefly press either of the follow mode gap increase or decrease switches. The previous gap settings resume and the follow mode warning indicator illuminates.