Electronic Engine Controls - INGENIUM I6 3.0L Petrol (G2299964): Specifications
WARNING: This page is about a different variant/trim than selected.
GENERAL SPECIFICATION
| Torque location | Nm | lb-ft | lb-in |
|---|---|---|---|
| Oil pressure and temperature sensor | 15 | 11 | - |
| Post catalyst Heated Oxygen Sensor (HO2S) | 48 | 35 | - |
| Transmission undershield M6 bolts | 10 | 7 | - |
| Transmission undershield M10 bolts | 60 | 44 | - |
| Pre catalyst HO2S | 48 | 35 | - |
| Crankshaft Position Sensor (CKP) bolt | 8 | - | 71 |
| Cylinder Block Temperature sensor | 11 | 8 | - |
| Exhaust Camshaft Position Sensor (CMP) screw | 8 | - | 71 |
| Knock sensor bolt | 20 | 15 | - |
| Intake CMP bolt | 8 | - | 71 |
| Manifold Absolute Pressure and Temperature sensor (MAPT) bolt | 4.1 | - | 36 |
| Piston cooling oil jet solenoid bolt | 11 | 8 | - |
| Engine coolant bypass hose bolt | 11 | 8 | - |
| Engine Control Module (ECM) bracket nuts | 7 | - | 62 |
| ECM to bracket nuts | 7 | - | 62 |
| Knock sensor bolt | 20 | 15 | - |
| Mass Air Flow (MAF) sensor screws | 2 | - | 18 |
| Cylinder Head Temperature sensor | 11 | 8 | - |
| Mid Catalyst HO2S | 48 | 35 | - |
| Variable Camshaft Timing (VCT) Solenoid bolts | 9 | - | 80 |