LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2019 >> Range Rover Sport Supercharged Dynamic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 57 (Electronic Engine Controls - INGENIUM I6 3.0L Petrol -- Range Rover Sport/L494) >> Electronic Engine Controls - INGENIUM I6 3.0L Petrol (G2299964) >> Description And Operation >> Electronic Engine Controls - INGENIUM I6 3.0L Petrol (G2300004) >> Description >> Oil Pump Control Solenoid

Oil Pump Control Solenoid

WARNING: This page is about a different variant/trim than selected.
G14066791Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
Item Description
1 Electrical connector
2 Oil pump control solenoid

The oil pump control solenoid is located at the front of the oil pump and connected to the Powertrain Control Module (PCM) through hardwired connection. The oil pump control solenoid receives a 12V power supply from the Engine Junction Box (EJB). The PCM controls the operation of the oil pump control solenoid valve by controlling the ground path for the solenoid. When the PCM energizes the oil pump control solenoid at low engine speed and loads, the oil pump switches to the low pressure mode. The low pressure mode reduces pumping losses within the oil pump and optimizes the fuel economy.

scientia non olet · About LEMON Manuals