LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2019 >> Range Rover Sport Supercharged Dynamic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Battery Charging - INGENIUM I4 2.0L Petrol - PHEV -- Range Rover Sport/L494) >> Battery Charging - INGENIUM I4 2.0L Petrol - PHEV (G2164943) >> Description And Operation >> EV Charging Issue Data Capture Sheet (G2796260) >> Charging Issue Data Capture Sheet >> CAN logger Setup Help

CAN logger Setup Help

WARNING: This page is about a different variant/trim than selected.
  1. CAN logger leads - Special Service Tool JLR-418-692.
  2. Compete a standard CAN link (1= PMZ 2=blank 3=Blank 4=Blank)
  3. Ensure diagnostic filter is not ticked and both trigger option are not ticked
  4. Run CAN link while you charge the vehicle try to charge the vehicle using a mode 2 charger
  5. If a fault occurs, leave the CAN link running for 5 minutes then stop and save the CAN Link (SAVE the CAN Link)
scientia non olet · About LEMON Manuals