Engine Cooling - INGENIUM I6 3.0L Petrol (G2299995): Overview
WARNING: This page is about a different variant/trim than selected.
The engine cooling system maintains the engine within an optimum temperature range under changing ambient and engine operating conditions. The system is a pressurized coolant expansion tank system.
The engine cooling system also provides:
- Heating for:
- The passenger compartment.
- For additional information, Refer to: HEATING AND VENTILATION - INGENIUM I6 3.0L PETROL and FUEL FIRED BOOSTER HEATER - INGENIUM I6 3.0L PETROL
- The electric throttle.
- For additional information, Refer to: INTAKE AIR DISTRIBUTION AND FILTERING
- Cooling for:
- The oil cooler.
- For additional information, Refer to: ENGINE - INGENIUM I6 3.0L Petrol
- The engine.
- For additional information, Refer to: ENGINE - INGENIUM I6 3.0L Petrol
- The automatic transmission.
- For additional information, Refer to: TRANSMISSION DESCRIPTION - TDV8 4.4L DIESEL
- The charge air cooler.
- For additional information, Refer to: INTAKE AIR DISTRIBUTION AND FILTERING
- The turbocharger.
- For additional information, Refer to: TURBOCHARGER
The primary components of the engine cooling system are the:
- Variable coolant pump
- Electric thermostat with heater element
- Radiator
- Electric cooling fan
- Coolant expansion tank
- Auxiliary coolant pump
- Viscous cooling fan
- Connecting hoses and pipes
- Charge air coolant pump
- Radiator outlet temperature sensor
- Auxiliary radiator.