LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2019 >> Range Rover Sport Supercharged Dynamic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 37 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- Range Rover Sport/L494) >> Electronic Engine Controls - V6 S/C 3.0L Petrol (G1514894) >> General Procedures >> Brake Pedal Position Switch Adjustment (G1395342) >> Check

Brake Pedal Position Switch Adjustment (G1395342): Check

WARNING: This page is about a different variant/trim than selected.
  1. Remove the brake pedal rubber.
  2. NOTE: Make sure that the dial test indicator (DTI) gauge is in line with the brake pedal movement.
    G11608468Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Position the DTI gauge on a suitable mounting block, as illustrated.

  3. With the aid of another technician, gently press the brake pedal until the stop lamps illuminate.
  4. NOTE: The specification is that the stop lamps should illuminate at between 5.5 mm and 8.5 mm brake pedal travel.

    Note the measurement of the brake pedal travel from rest position until the stop lamps illuminated.

scientia non olet · About LEMON Manuals