LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2019 >> Range Rover Sport Supercharged Dynamic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 37 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- Range Rover Sport/L494) >> Electronic Engine Controls - V6 S/C 3.0L Petrol (G1514894) >> General Procedures >> Brake Pedal Position Switch Adjustment (G1395342) >> Adjust

Brake Pedal Position Switch Adjustment (G1395342): Adjust

WARNING: This page is about a different variant/trim than selected.
NOTE: The Brake Pedal Position Switch is self adjusting when removed and installed.
  1. Remove and install Brake Pedal Position Switch. For additional information, Refer to: STOPLAMP SWITCH
  2. Check the adjustment of the stop lamp switch by following the Check  procedure in this procedure and carry out the Adjust  procedure if required.