Automatic Transmission/Transaxle - Vehicles With: 8HP45 8-Speed Automatic Transmission AWD (G1772184): Specifications
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Use only Shell L12108 (ZF Lifeguard 8) Automatic transmission fluid. Use of any other fluids may result in a transmission malfunction or failure.
| DESCRIPTION | INTERVALS |
|---|---|
| Normal maintenance | Filled for life. |
| Severe duty maintenance | Change the fluid at 48, 000 km (30, 000 miles) intervals. |
CAPACITY SPECIFICATION
| LITERS | |
|---|---|
| Transmission | 8.5 |
LUBRICANTS, FLUIDS, SEALERS AND ADHESIVE SPECIFICATION
| DESCRIPTION | Specification |
|---|---|
| Transmission fluid | Shell L12108 (ZF Lifeguard 8) |
| Sealant | WSS-M4G323-A6 |
| Metal surface cleaner | WSW-M5B392-A |
| High temperature grease | Molecote FB180 |
Torque Specifications
NOTE:
*refer to the procedure for correct torque sequence.
TORQUE SPECIFICATION
| DESCRIPTION | NM | LB-FT | LB-IN |
|---|---|---|---|
| Transmission retaining bolts | 40 | 30 | - |
| Transmission mount retaining bolts | 63 | 46 | - |
| *Transmission fluid fill plug | 35 | 26 | - |
| *Transmission control module (TCM) and main control valve body retaining bolts | 8 | - | 71 |
| Torque converter retaining bolts | 63 | 46 | - |
| Transmission fluid cooler tube retaining bolt | 22 | 16 | - |
| Transmission fluid drain plug | 8 | - | 71 |
| *Transmission fluid pan, gasket and filter retaining bolts | 10 | 7 | - |