Roof Opening Panel

The roof opening panel switch in the front overhead console controls the roof opening panel with a one touch function in the direction required:

Operate the roof opening panel switch once to tilt the roof opening panel.
Once tilted, operate the roof opening panel switch again to open the roof opening panel.
Operate the roof opening panel switch to close the roof opening panel from tilt.
From the fully open position, operate the roof opening panel switch once to close to the tilt position, then operate again to close fully.
Roof opening panel movement can be halted at any time by operating the roof opening panel switch again.

NOTE: The roof opening panel will operate for 30 seconds after the ignition is turned off, provided that a front door is not opened.