LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2019 >> Range Rover Sport HST >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 76 (Exhaust System - TDV6 3.0L Diesel Gen 2 -- Range Rover Sport/L494) >> Exhaust System - TDV6 3.0L Diesel - Gen 2 (G1509407) >> Description And Operation >> Exhaust System - TDV6 3.0L Diesel - Gen 2 (G2284108) >> Description >> Exhaust Rear Section

Exhaust Rear Section

WARNING: This page is about a different variant/trim than selected.

The exhaust rear section comprises a single intermediate pipe, which separates into 2 pipes that connect to the rear silencer assemblies. The exhaust rear section is connected to the exhaust front section with a clamp.

The inlet exhaust pipe of the exhaust rear section comprises an exhaust pressure control valve. For additional information, Refer to: ENGINE EMISSION CONTROL - TDV6 3.0L DIESEL/TDV6 3.0L DIESEL - GEN 1.5/TDV6 3.0L DIESEL - GEN 2 (G2284104)

Each rear silencer is supported by 2 mounting rubbers. One is attached to a mounting welded on the side of the rear subframe and the other is attached to a bracket bolted to the vehicle body.

scientia non olet · About LEMON Manuals